In my post earlier i talked about how you can setup your newly purchased or existing CCcam account to be up and running on your strong decoders. However in this post the focus shall be on how to do the same thing on Dreambox HD Decoders and Openbox decoders.
This is a total guide even for newbies and i shall be posting it with the aid of basic screenshots.Meanwhile to learn all you need to know about what a CCcam account is you can view my post here
Requirements:
Any compatible HD Decoders e.g Dreambox HD, openbox s10, s11 or its equivalent
2. 3g Router or equivalent.
3. Cross-over
Network Cable having Rj-45 Plugs
(used in connecting receiver to computer)
4. a Cccam Account that will give you Cccam.cfg (To buy one please view my post here)
Setting Up a CCcam Account on Dreambox Receiver:
i. Connect DSL Internet line with Your
Dreambox and go to blue panel by pressing blue button on remote.
ii. Go to addons > Cam and Select CCcam 2.0.11 Complete or latest For Download and then install it.
iii. Then Enable AUTO CAM, From blue the Panel.
vi. After That Go to auto Cam and Change Default Cam to CCcam 2.0.11 or latest Which you installed.
v. Replace The CCcam.cfg which was sent to you in VAR/ETC.
iv. For this You Need to Ftp to Dreambox . Connect Your Dreambox to Your Computer Using a Cross-over Network Cable having Rj-45 Plugs both sides.
iiv. After Connecting Your Dreambox to Your Computer , Open Lan Card Properties > TCP/IP Protocol Properties > Put IP 192.168.0.1 and subnet mask as 255.255.255.0 and then Close the tabs.
iiiv. Now in Dreambox go to Menu > Setup
xi. Expert Setup > Comunication ..uncheck DHCP and put IP 192.168.0.2 and same subnetmask. and save it.
FURTHER SETTINGS TO BE MADE:
i. Open Internet Explorer and type ftp://192.168.0.2/
ii. Default Username: root Password: dreambox ,
open var folder then etc and replace or paste your CCam.cfg file .
iii. Then Plug the DSL internet line into Dreambox and go to Menu>setup>expert Setup>comunication
> .. Check DHCP and ENJOY Your Favorite Channels.
As for openbox syou need to complete the followings so that you can use it with cccam
accounts:
i. connect your satellite LNB with your decoder
ii. use 3g router ,transfer internet to lan port internet ,connect LAN INTERNET PORT with decoder
iii. connect your TV with your decoder
iv Then set your CCCAM ACCOUNT into your decoder
Now How to set cccam account into openbox s10:
1, download “cccam.cfg” file, overwrite the test account into it . save the changes.
2, add the cccam.cfg file to a USB Stick, do not zip the file, add it as is
3, goto Menu -> Network Local Settings and select CCcam Plug Setting and click the OK button
5, select CCcam,cfg [CCcam Plug] and (this CCcam.cfg will be provided when you buy your cccam Account/ server) click the OK button, you should then see a check mark or tick appear, indicating you have selected the file, if there is no tick shown, then you have not selected anything,and nothing will be installed go over it and double check okay
6, if there is no tick displayed, select CCcam.cfg [CCcam Plug] and click OK
7. Once the tick is displayed, click the Yellow(Read ) button.Now select CCcam Plug Setting and click the OK button. as shown below
8. select the First option 1 .. CCcam.cfg and click the OK button.
9. Now highlight each cline you wish to activate, by clicking the OK button, a tick box will appear next to each cline you have activated.
10. Now check that your Network Settings are configured correctly
11. If your router supports DHCP turn it ON and click Apply.If your router do not support DHCP you will be
required to set it up manually, click Apply once you have set it up correctly (I will advice you to get a 3g router that supports DHCP)


that is about all and if you encounter any problem with the above post do comment in the box below. Meanwhile you can get more of similar stuffs in our WEB FORUM for free. So if this post has come handy, why can’t you just share it with someone out there/
Hi Lemmy can you help me here,can any gshare server open being sports on es’hail satellite
@opio: forever vip servers is currently opening beIN on 26e
How can I get cccam account
@jood: you can check this out Where and from Whom to buy Satellite tv receivers or Components Without Being Scammed
great
Hi do have cccam cline acc of 36e zaptv & 16e canal reunion
need cccam
fast cccam C-Line no cutting no freezing
first check then buy
(1) month 70 (2) month 150 (3) month 200
(6) month 350 (12) month 650
Call sms 03013766630 03347706630
test line also available
Hi can you help me how to setup cccam to my KI Plus. Please email me.
@Sugiman: use the instructions here to your advantage. http://www.lemmymorgan.com/learn-how-to-setup-or-activate-your-cccam-account-server-with-dreambox-openbox/
How can I create the account without purchasing created ones myself???
pls lemmy,I was busy upgrading my dreambox 800 to b able to use it wit cccam,after d upgrade the decoder refused to booth,I entered d error message dat it displayed on my web browser and it says I need to flash it.pls am finding it hard to do it .I need ur help
hi lemmy,
pls i need a working cccam account dat can decrypt DEVILSTV HD channels.
Tnx
@Damie, yea you are talking about tv1.. its available and its the only cccam opening deviltv
can china friend can give me the azsky account
what error or problem are you facing
I am from Lebanon
currently i have Strong 4930
and i want to but another to be connected to internet
– i want to buy an account?
– should i buy strong 4930 L (having wireless connection to the router) or buy another one 4930 and add a add-on software to connect wireless to the internet since no LAN connection exist in my strong 4930
– is there any new technology in strong more than 4930 series
– can i configure same internet account for two receivers
– all encrypted channels will be decrypted ?
thank you in advance and best regards,
Elie
thanks for sharing this vital info with us.please i would like to if the 3g router needed to be connected online before connecting it to the decoder?2.can i use a non hd strong decoder for the connection?3.what can i do to be able to get dstv channels with the strong decoder?thanks.
you can only use a decoder with lan port with the connection HD or no HD. To get dstv with srong decoders read my topic on how to enable cccam account on strong decoders here on this blog. you may use the search for this
nothing is impossible you can make it
where to get it in Ghana please
you buy cccam online now
Lemmy,
Thanks for the good stuff you have been sharering with all. please where do we get these decorders to buy ?. the vendors in my city Makurdi have not heard yet that there is a decorder that uses cim card
You can get it in Lagos or thru me