I will like to familiarize us with the processes/steps involved in connecting your azsky dongle(or similar working dongles) to qsat q13g, q23g and speed hd s1. There is one unwanted feature on these sets of decoders, (I mean q23g , q13g and speed hd s1). The features is bout the rs232 cable port which is in form of an earpiece audio jack / socket or a microphone port I mean the rs232 cable that will work with them must have a pointed mouth instead of the 9 pin serial ports that is on strong decoders, azsky g6, qsat q11g, xman g8, tlink decoders and most other decoders. I think the intention of qsat team for doing this is because of the followings: i. they want their decoders to be as light as possible, ii. they want their decoders to be as small as possible, and maybe ii. they don’t want their users to be able to easily use any dongle on qsat.
This development, however, have two major adverse effects on qsat subscribers: 1. it makes it extremely difficult for an ordinary user of the affected qsat products to be able to use a dongle on qsat, 2. It also makes it difficult to perform any form of pc upgrade on qsat decoders.
HINTS ON BUILDING THE PIN-TO-PIN RS232 CABLE YOURSELF
This tweak is Cortes of my fans here by the name of st. Midas he said:
Easily connect azsky to qsat
I just converted my azsky cable (serial to ping) to pin-to-pin, and use on qsat, and it is working!
azsky serial cabling uses 3 wires(I open where the wires connect to a serial port); pin 1=red pin2 =white & pin3=yellow
Procedure
Two earpieces (with only 3 segments) some have four or more segmented iron pin
Connect the wires; red to red, yellow to yellow and white to white. under ACAMHD/OFF
I hope this will help. Anybody can do this easily without resorting to a computer shop or radionic
WHAT CAN I DO TO BE ABLE TO USE AZSKY DONGLES ON QSAT DECODERS
First thing first, if you are using a qsat q11g or q16g, you can simply buy azsky g1 super dongel and connect it directly to your qsat by following my guide here: How To Connect An External Dongle To Qsat Receiver and you are good to go. However, if you own a qsat q23g, a qsat q13g a speed hd s1 or any qsat decoder that hack only earphone socket as its rs232 ort, then you need to improvise. If you are in Lagos, you can go to computer village or alaba international market and search for a rs232 cable that have pin-to-pin mouth. In other words, both ends of the rs232 cable looks like the pointed mouth that is plugged into an azsky g1 super or A+ dongle. If you can’t get this readily available in the market(which is likely to be the case) then you will need to buy two rs232 cable compatible with azsky g1 super or A+, cut it into two and join the cabes with the pointed mouth to each other. Please if you are not tech savy, simply take this to any organized technician to help you cut and join. Once you are done joining it together, it will look like the one i did in the picture below:
You can now follow my simply tutorial from the link above to easily connect your dongle to your qsat and use it to decrypt dst* channels on qsat while qsat preloaded account is off.
IMPORTANT NEWS: Am bring it to the notice of lemmymorgan fans that since azsky came back about a month ago, i have never experienced any abnormal freeing of channels when using my azsky dongle as a dongle on qsat decoder. In other words, azsky dongles now work perfectly with qsat decoders as it would with strong decoders
@Albert you don’t need to press any Blue button when connecting any Dongle to qsat decoder
hi lemmy your connection image is very bad i don’t know if you bridged the other 5 wires apart from the white wire pls show your connection clearly
@paul, the cable is now been sold. please buy the already improvised ones. that is the best way. i only did that and it worked. you are only required to use it as an idea
Lemmy,
I recently acquired the Azsky G1 Super Dongle in order to be able to decrypt channels when qsat server is down. My QSat receiver is the Q13G+. The RS232 cable included with the Azsky is not compatible with Q13G+. I acquired a different cable (3.5mm pin to 3.5mm pin), this cable is a 3-pin audio cable. Can I use this 3-pin audio cable in place of having to cut and join a pin to the existing pin that came with the Azsky?
There are LED indicator lights on the Azsky G1 Super, which state of the lights shows proper operation? Red, Orange, Green?
There are two tiny knobs/switches on the back of the Azsky dongle (Link and Set). Where should the position of these knobs be? Up or down?
Thanks and regards.
@Dick, please read: How To Connect Azsky Dongles to Qsat Q13G, Q23G & Speed HD S1
Pls Lemmy happy Christmas pls I don’t know what is wrong with AZsky G1+ I hv connected it with my Qsat q11g but it is not showing and light is blinking normal
@Chigo use it on another decoder
Haaaaaaaallllllleeeeelllllllluuuuuyyyyyaaaaaaaah I;m very happy, I just cant contain my excitement!
Easily connect azsky to qsat
I just converted my azsky cable (serial to ping) to pin-to-pin, and use on qsat, and it is working!
azsky serial cabling uses 3 wires(I open where the wires connect to serial port); pin 1=red pin2 =white & pin3=yellow
Procedure
Two earpiece (with only 3 segments) some have four or more segmented iron pin
Connect the wires ; red to red, yellow to yellow and white to white. under ACAMHD/OFF
I hope this will help. Anybody can do this easily without resorting to computer shop or radionic
Lemmy let this contribution be pls. u’v been deleting my posts, i wonder why!
I am not in Lagos but in Ibadan, i need it urgently and hw much is d total cost sir.
I want to buy cable pin in to 9pin 4 q23 hw much Lemmy, mail me richardokechukwu53@gmail.com
@richy, it is available but cost of transportation is even more than the cost of purchasing it. if you are in Lagos, please check Alaba Intl market in lagos
pls lemmy is it possible to connect azsky G1+ to qsat 13 using the rs232 cable that comes with azsky G1 super considering the fact that qsat 13 has a jack (stereo like) rs232 port or hole.
@evans, you will first need to convert the cable to what q13g can use
I am a follower of ur post and it has been awesome thank you,
Recently I decided to follower your post on HOW TO FLASH NOKIA PHONES using navifirm and phonix service software.
foloowing the procedure I got staked, the navifirm is not responging. when u reach firmware update and you click on the button a pup up shows with Neither DP1.0 nor DP2.0 was found for the product, or the product cannot be identified.
pls show what to do. I will be glad thank u for the works.
@car, also make sure you google and download the latest version of navifirm
I just love this site very simple and straightforward to the point, Thank you so much
is Speed HD S1 down?
@arweka it is up
pls I also use the azsky g1 gprs
adapter when I put it on the network
connects alright but it does not show I use
Qsat q23 lemmy pls hep
@Pual, please try it ot with a strong decoder sir.
@Lemmy Morgan, greeting from Tanzania, my box had been off for more than two weeks, i followed your advice here, re-upgraded with a different sim card and now i’m connected. Qsat 11 Code 57. Be Blessed.
Do you know anyone who want to sell QSAT11G, please link me up.
If U want to sell Ur QSAT11G, i will buy it.
Call me on 08038028882 or contact by Email: emailosita@gmail.com
pls I also use the azsky g1 gprs adapter when I put it on the network connects alright but it does not show I use Qsat q23
There is no error message, just display 0%waiting for more than 30 minutes. I have been flashing before, it doesn’t take much time that. Thanks
@oj, then try another dongle thanks
Thanks for the answer, but I read in one of article that if you want to flash for the very first time” you need to enable format fat”. I will try another system . once again thanks.
@oj, if you try enabling format fat, you will surely damage your dongle to the extent that no account will ever work on it again
pls i upgraded my 13g not 23g as
indicated earlier but it chaged to 11g after
everything.
i have 2 dishes one for dst nd another for multi
the dst stil not conecting to server but the multi is
ok nd it has added more chanels
like fight ebola. pent. nrt. and plenty astra chanels
which do programes abt space. is everthing right
@snr, you will need to manually set your disecq switch so that it can point to your dstv dish
Sir, you have not reply my post, which is the first post on this article. I’m flashin one Azsky g1+ for the first time(I.e it has not taken account before), should I enable the format fat? Because for good 30minutes the downloading bar is not moving. Pls, I need answer!
@oj follow the instructions to the last letter. Search the site for solutions to flashtool errors. Don’t dare enable format fat or else, you will permanently damage your Dongle
Oga lemmy am so happy to get a forum like dis! I hav learnt a lot tru dis ur site! more grace to ur elbows, Plsss my QSAT 13 is still not working and I hav a G1+ Azsky, can I paired dem both so I can use or wat do I do to start viewing scramble channels?
Thanks
Pls lemmy my remote control does not work on number 2 key. I can not press 1512. How can I reactivate my xcam on q13
Hi mr L M may God bless u. pliz I have a prob with my Azsky its lock on standble red i tried 2 flesh with the soft ware you posted It can read boatinf at the end for me 2 press 2 it display an info.HDIM POWER ON FAIL PLEASE CHECK IF HDIM IS CONFIGURED TO 2.5 V pliz help
Oga lemmy, pls i got a pin to rs232 cable for q23g but it was blinking normal but not descrambling the channels. pls help.. thanks
@Ay, then the cable is not well built.
Q sat has starting work .chk urs.
Hi Prof Lemmy. After Upgrade my xcam setup is missing: I pressed 1512 to reveal it but number 2 is not active on my remote. I could only write 151. Can you adice please. is there any other way I can reactivate the xcamhd on qsat13g.
@kijijini menu>>Setting >>ok button >>1512
Please Lemmy can you direct me to website where i can download the latest software for my Q13 and Q15.
@Lemmy any idea from QSAT when other codes will be coming on air, I mean connecting to server.
@Lawbohe, all qsat now back please read my latest article
Qsat is back with airtel line. Working very smoothly.
after using flashtool on one azsky it refused to blink
update , just restarting and restarting . d funniest tin
is dat i used same flashtool for other azsky and dey
are working fine. wat could b d solution @ everyone i
appreciate your response. thanks
good day oga lemmy,how do i recharge my azskyg6
was trying to upgrade my QSAT 11G+ but its saying NO FILE MATCH. I discovered that when I extract the file the other file will change to the default file I used in opening a similar file.
Please help!
Pls Oga Lemmy,
Where can I download the latest software for my Qsat Q11g
Hello Lemmy, please i need a little help form you. i ask the qsat people to help me with the problem of my Q23G and they email me with a software version 6.07.83 but the time i bought my Q23G decoder i already do have a version 6.08.63 so what should i do now? the name of the woman i talk to is RITA LEE of Qsat. I do have a friend who uses the same Q23G but it is working perfectly with no scramble but i dont know the main reason why mine is not even connecting at all, i was the one who bought the same decoder for him and im even jealous about him now.
Pls lemmy,if u av a dual view strong decoder ,can it work wit azsky G1 and can it view dual dst* channel at dsame time. Tanks
@segzye, it can’t work with azsky sir
my Oga gud mor,sir is possible to connect az g2 with Qsat 13g.pls reply me.
@OLUMIDE, NOO
Mr Lemmy please how much is aszky account?
Oga lemmy thanks for the info.
I have gotten a in to in cord.I have connected it but yet is not working. What can I do?
@abgey, it’s not just about the cable. Use rs232 cable dont just get any in to in cable
was trying to upgrade my QSAT 11G+ but its saying NO FILE MATCH. I discovered that when I extract the file the other file will change to the default file I used in opening a similar file.
Please help!
Mr Lemmy, thanks for the great work you are doing. Pls can you help me get the g1 super and the rs232 cable to use on my 13G Qsat? If you can help me to get, pls send me the price on yemisaka2001@yahoo.co.uk
@yemmy, contact me on Info@ lemmymorgan.com for further action
I mean the first green light on d left is on while d other is blinking
Is there any additional settings for azsky connected to Q13g cos mine is not connecting and it not even giving me network connection success…..the first green Light on the right is green and d second is blinking d same green
Pls is d cable d same with an Headset in to in????like from phone to headset….and where wud d sim card be?.Qsat or azsky?
@dave, please read instructions it’s not audio in to in cable
Oga how do I connect azsky G1 with a serial port to qsat 13g which has a pin port. How can you do wiring.
lemmy do you latest version v6.10 for qsat13g
Hi Lemmy,
Thanks for the updates. Please I need Ur help.
How can I use “Flash Tool” on Azsky G6. I have Flashed and Load A+Supper (Successfully).Tried many
times but Flash Tool did not work on G6.
Please help with what I can do.
My Q15 kept re-starting after “network success” Pls whatz the problem and what can I do?
in to in as in aux cable?
@doctor kind of
lm pls how can i update the andriod version of my techno phantom a+ mobile phone
Hello lemmy happy sunday. My Qsat Q23G with code 46****just came back this morning. Please how do I switch off the CCCAM account on it? It’s consuming a lot of airtime running concurrently with the Qsat account.thanks!
Thanks lemmy for the good works we really appreciate. pls i heard that qsat have new software which is version 6.10 any info about it and kindly help us upload it thanks.
@saint, there is a new software but it didn’t help anything
Gud morning Morgan d Dr. Of all dongles, pls i want to know if speed hd s1 and azsky dongle can work if connect togather on dstv and Nss 7 22.0 west?
Dear Sir,
I will be very happy if u could explain to me CW and Cccam
Thanks
@a m young you mean control word? Cccam is card sharing
Thanks 4 d update sir. To make things easier, u can just buy an in to in cable 4 d connection.
@suncosmo, yes you are right 👉
As 4me wat i did is dat i luk 4 g1 super rs232 cable connect it with my asky g1+ and my q13g+ and am gud to go.
Good day lemmy ,thank u for ur good work.pls do u know about a decoder called BESTHD 4U,if yes,please enlighten me.thanks from FRIDAY
good evening mr. Lemmy, I just want to know if all codes of qsat are working now
@ofori, nothing like that