With every device software upgrade, comes some degree of risk to the device itself. In the course of upgrading your gsky decoders to the latest available software via USB, some of you might have killed the receiver. You can soft-brick your gsky and any other receiver for that matter by making some of these mistakes: 1. power failure during the upgrade, 2. corrupt software, 3. incompatible software and so on. The good news is that you can revive such dead Gksy decoder via the universal Gsky pc loader known as GSKY_RS232_upg PC tool.
Yes, you can revive your decoder using a computer, rs232 cable, compatible gsky software and Gsky pc loader/tool.
GSKY_RS232_upg PC tool for Dead GSky Decoders Revival
I want to quickly chip it in that the pc tools only work with a gsky decoder that is soft-brick(Soft-brick in the sense that it has a major software problem mostly caused by wrong upgrade, an incomplete upgrade or failed upgrade. if your gsky is having a hardware problem, this will not work for you.
Pay attention
REQUIREMENTS
- An original gsky decoder
- you must own a desktop computer or borrow one or have access to one
- you must own or borrow an rs232 cable(you can buy one from computer shops or ask your local satellite installer to help you get one)
- Then download the gsky pc tool here
- Download the software for gsky v3 or v6 here
Process of Restoring the Decoder
- After downloading the pc loader and the software from the links above,
- Extract the .rar pc tool so that you can have access to the folder inside.
- open the extracted folder that goes by the name “GSKY_RS232_upg_tool“
- Then run the file inside the folder named “TCOM_UPG.exe“
- Choose the correct “COM PORT” for your serial port.
- Choose the upgrade software
- Click start and then power on your dead decoder.. once the upgrade completes, you can continue enjoying your Gsky normally as if nothing happened in the first place.

I get error installing TCOM_UPG.exe “the application has failed to start because its side-by-side configuration is incorrect. Please see the application event log…”
@Steven: It is either you have an incompatible OS or a missing driver.
I found it. It was install the right Microsoft Visual C++ I think it was 2008 32bit or 64 bit. then it worked. I wish i could direct it to the most recent C++ yet not sure if I can.
plz send latest frimwere Gsky v8..working sony pkg 68.5East & Mtn pkg 57.East..
@sanjay: it hasn’t been released
bless you Lemmy
my gsky decoder is brick during sorftware upgrade power off now one gsky display isee red light the other one green light now itry download the upgrade software and pc tool throuh rs232 run pc loader tool select the gsky software connect the gsky rs232 cable usb to serrial usb on pc serial on gsky the connection is ok when start on the tool display reaset stb now power on my gsky there is no change/upgrade please help me.
@geremew : please use a desktop computer
Pls can this revive alphabox x4 decoder?
@ All… why do my Q11g show CONNECT TO SERVER most of the time especially when I am enjoying some nice programs..? I sometimes off and on but this doesnt solve it all the time except after a long while before it start working again..
@profkris: please use a very stable internet connection. change your current internet connection
Thank you for the advice @ Lemmy
Lemmy reply email and tell me how u sell acct, no dey ignore person. If u dont want to sell, be exact about it!
SHE’S BACK!!
Thank God the Queen is back this evening and blazing without any scrambling
Am I wasting my time here?? I downloaded the Rs232 to my computer. I unrar the file. Then I try to run “TCOM_UPG.exe“ . My computer hang out it does nothing. can not open the desktop computer, rs232 cable, compatible gsky software and gsky pc loader / tool. Please help Lemmy
Oga Lemmy,please I was updating my strong srt 4922a this morning and the power went off on it,please what am I going to do to revive it
everything is off since morning let he w back soon
tax Mr Lemmy we will be waiting then
is general so if yours doesn’t connect please change sim n leave it
mine is also not working since morning
Pls the house can someone update me as to the working of Qsat today. Mine was working last rightonly to go off since morning today.
hello lemmy , my q sat 26g is not working, is supposed to expire by next month. so I don’t know what to do.
Hello Lemmy and everyone. I can’t get my qsat to work. I used two different mtn lines and even tried with q11g and q23 qsat models but they cannot connect to server. Is there anything I need to do? Suggestions appreciated.
@jerome you need to download and install the latest available spycam software before it can’t connect to server.
Jerome, use Airtel. But Qsat is off now.
Lemmy,send mie the amount of gsky decoder plz.Here’s ma mail abdullahikuliya @gmail.com
Does anyone can run the TCOM_UPG.exe? I can not?? Please help!!!!
tax a lot Mr Lemmy. but plsss u have left out those of us who use SRT 4922a. u hvnt directed us where to get the new software for the aformation device. tax
@salim : am coming for you guys too. Today
TCOM_UPG.exe Not working software … its say application has failed if you have any TCOM_UPG.exe application please send me on my email :-* minilover2014@gmail.com
Q sat engineering team has improved on avatar cam account this january.
less all hope so because we were kept in caged
This shows that they really care our concern
As at yesterday Qsat is working fine to my surprise it open Africa Magic Yoruba action which are not been working before. I convinently watched newc vs man united yesterday but skipping for 3-6 seconds. Thank you Lemmy.
Thanks for the software
Yes, good news for Azsky users, very soon the king of dongle will come up like never before.
House Qsat Any latest!
I can not open the file TCOM_UPG.exe? Is the file OK?? Please make corrections. Thanks
How abt the azsky g+1. Any hope
GOOD WRK SIR,MY QUESTION IS, DOES IT MEANS DAT GOIN 4 ANY GSKY Vs I NEED TO GO THRU AL DIS pROCESS
We all appreciate ur effort. Thanks
Something is wrong with the file. Can not open or run?? Can you double check??
Thank you very much Lemmy!! Excellent Job!!