This post was last updated on June 27th, 2019 at 01:11 pm
Today, I will be presenting to you, two wonder decoders from Gsky team. Gsky v6 and v3 HD decoders are the very first set of unofficial powervu FTA receivers that can be used the world over. Today will be about GSky V6 vs V3 FTA decoders review. If you do not know anything about powervu technology, please read my article here. Without wasting much of our time, let us go to the unique features of these receivers before going into the full specs.
Updates: Support for GSky V6 and V3 has stopped. You need to get hellobox v5 plus in order to get the best of auto-biss and powervu auto roll functions.
Read Also:
GSky V6 vs V3 Receivers: Features Comparison
- The boxes is a dedicated powervu(manual roll) and free to air open source decoder. Using this in a layman’s language, it means you can buy use and open all your powervu channels with it without searching the internet for powervu keys(just like it is been currently done on strong)
- One of the models, I mean the v3 comes with a smartcard and it basically only opens powervu channels as well as other FTA channels. Without the smart card, gsky v3 cannot open any powervu channel. no internet tv support for it. Gsky is, however, cheaper than v6
- Gsky V6 is a full HD powervu/ FTA/IPTV/IKS receiver. It does not come with a smartcard as it uses preloaded software to decrypt powervu channels out of the box.
- The receivers plug and play indefinitely. This means you do not need to worry about monthly, quarterly or annual account renewal.
- These decoders can work anywhere in the world as long as your dish is positioned to receive the supported powervu signals enough to receive the powervu signals
- Powervu does not require an internet connection for it to work, however, you need internet for the IPTV functions as well as for cccam if you want to use it.
- The two models: I mean gsky v3 and v6 like i said earlier has an algorithm that automatically helps you calculate the powervu keys needed to decrypt a powervu channels. meaning you do not need to be searching all over the internet to get working keys.
- If new powervu channel is out, you only need to notify me and I will ask the manufacturer to release new software that will decrypt that particular channel.
What are the Internet ConnectionProtocols Available for Gsky V6?
Gsky V6 decoder supports the following internet protocols:
- Wifi connection via a USB wifi adapter.
- 3g connection via 3g a USB modem.
- 2g / Edge /GPRS Connection via 3g modem(just set your modem to edge/Gprs Only
- Lan Internet via a LAN cable. And always remember that to view any powervu channel on v6, you do not need internet connection whatsoever.
Channels List on Gskyand Hellobox PowerVu Satellite Decoders
First off, Gsky and hellobox receivers can open powervu channels from the following continents and countries.
- Asia: Indonesia, Philippine, Malaysia,Thailand,Myanma,Bangladesh,India,Pakistan,Australia,Fiji,Guam,Saiban,Singapore, Japan,Korea, Sirilanka,Napel,Vietnam,Laos,Cambodia, etc,.
- Latin America: Mexico, Panama,Brazil,Agentina,Chile,Peru,Columbia, …etc,
- Middle East & Africa.
Full PowerVu Channels list on Hellobox and Gsky Receivers
- GSKY receiver the Middle East and Africa PowerVu Channels: For the easiest to receivable channels and their frequencies in africa please read this article here.
- GSKY receiver Asian PowerVu_Channels:
- GSKY receiver Latin American PowerVu_Channels: for Latin America: Mexico, Panama,Brazil,Argentina,Chile,Peru,Columbia, …etc
Please download GSKY receiver Latin American PowerVu_Channels20150808. pdf file
Full Technical Specifications of Gsky V6 HD Receiver
Features
Fully SD/HD DVB-S2/S compliant, Support full HD 1080p
Support SD/HD MPEG2 and MPEG4 H.264
DiSEqC1.0/1.1supported
Universal LNB, NIT search support
Auto and manually scan all available TV and radio channels
Support software upgrade over OTA
Powerful and highly effective 7-day EPG function
Multi-language menu, subtitle and audio output supported
USB 2.0 for PVR, TimeShift, Software upgrade and media files playback Support aspect ratio 16:9, 4:3
Support parental lock, local time, Teletexand Subtitle
Easy to use and attractive menu
Up to 6000 channels
Conditional Access(PowerVudecode and Multicassupport)
IKS(most stable Cccam/Newcamd) and IPTV function support;
Support various media files, including music/photo/movie files
-
Tuner
Input Frequency950~2150MHz
Loop Out Frequency 950~2150 MHz
Input Level-65~-25dBm
Input Impedance75Ω
LNB Power13V/18V/OFF
-
Demultiplexer
Standard: ISO/IEC 13818-1
Input Max Bit Stream Rate: Max. 80Mbit/s @ MPEG2 Max.
60Mbit/s @ H.264/AVC
-
Processor & Memory
CPUMIPS 24K Dual-Core
Flash Memory32Mbits
SDRAM512Mbits
Clock Frequency400MHz
Powerful Multimedia Features
Photo: JPEG,BMP,PNG
Audio: WMA,MP3,AAC (wma,mp3,m4a)
Video: MPEG1,MPEG2,MPEG4,H.264
Mpg.dat.vob.mov.mkv.mjpeg.ts.trp
NTFS,FAT32,FAT16
JPEG/Audio combo playback
Channel Decoding
Standard:DVB-S/S2 SCPC/MCPC compatible
FEC:1/2,2/3,3/4,5/6,7/8 Automatic
Reed Solomon:204,188,t=8
Symbol Rate:2M~44.9M
Video Decoding
Standard:MPEG-2 [email protected], H.264
SD&HD transport stream decoding
Aspect Ratio:4:3,16:9
Audio Decoding
Standard:MPEG Layer 1&2, MP3
Output Mode:Left/Right channel,stereo
Sampling Frequency:32,44.1,48KHz
Peripheral Interface
Indicators: Power, Signal lock
IR Receiver: 38KHz
LED display
LNB In
HDMI 1.3 output
USB2.0x2
Digital audio Coaxial output
CVBS/AL/AR
10/100M Ethernet interface
RS232 port
Power input : AC 90-240V,50/60Hz 20W Max
Power switcher
GSKY V3 HD DVB-S2 Satellite Receiver
Features
Fully SD/HD DVB-S2/S compliant , Support full HD 1080p
Support SD/HD MPEG2 and MPEG4 H.264
SCPC & MCPC receivable from C/Ku band satellites
DiSEqC1.0/1.1supported
Universal LNB, NIT search support
Auto and manually scan all available TV and radio channels
Support software upgrade over OTA
Powerful and highly effective 7-day EPG function
Multi-language menu, subtitle and audio output supported
USB 2.0 for PVR, Timeshift, Software upgrade and media files playback Support aspect ratio 16:9, 4:3
Support parental lock, local time, Teletexand Subtitle
Easy to use and attractive menu
Up to 6000 channels
Conditional Access(PowerVuand Multicassupport)
Support various media files, including music/photo/movie files
Tuner
Input Frequency950~2150MHz
Loop Out Frequency 950~2150 MHz
Input Level-65~-25dBm
Input Impedance75Ω
LNB Power13V/18V/OFF
Demultiplexer
Standard: ISO/IEC 13818-1
Input Max Bit Stream Rate: Max. 80Mbit/s @ MPEG2 Max.
60Mbit/s @ H.264/AVC
Processor & Memory
CPUMIPS 24K Dual-Core
Flash Memory32Mbits
SDRAM512Mbits
Clock Frequency400MHz
Powerful Multimedia Features
Photo: JPEG,BMP,PNG
Audio: WMA,MP3,AAC (wma,mp3,m4a)
Video: MPEG1,MPEG2,MPEG4,H.264
Mpg.dat.vob.mov.mkv.mjpeg.ts.trp
NTFS,FAT32,FAT16
JPEG/Audio combo playback
Channel Decoding
Standard:DVB-S/S2 SCPC/MCPC compatible
FEC:1/2,2/3,3/4,5/6,7/8 Automatic
Reed Solomon:204,188,t=8
Symbol Rate:2M~44.9M
Video Decording
Standard:MPEG-2 [email protected], H.264
SD&HD transport stream decoding
Aspect Ratio:4:3,16:9
Audio Decoding
Standard:MPEG Layer 1&2, MP3
Output :Left/Right channel,stereo
Sampling Frequency:32,44.1,48KHz
Peripheral Interface
Indicators: Power, Signal lock
IR Receiver: 38KHz
LED display
LNB In
HDMI 1.3 output
USB2.0 port
Digital audio Coaxial output
CVBS/AL/AR
RS232 port
Power input : AC 90-240V,50/60Hz 20W Max
Power switcher
hi which modale is goog for ethiopia GSKY v6 or other modale
Does the GSKY V6 works without internet or wifi or 3g signals or we have to ahve a net connection for that??
Please reply??
please which one of these will you recommend for me for use.
am in Ghana(Africa). for sports and movies .
Alphabox x4
Openbox v8 pro
Gsky v6
thanks.
please which one of these will you recommend for me for use.
am in Ghana(Africa). for sports and movies .
thanks.
it looks nice.but how I can gate it in ethiopia
@suleyman kedir: i can sens it to any where in the world via dh or equivalent carrier. simply contact me via my email “info @ lemmymorgan.com”
Hello Lemmy! How many channels does the MyTV compliant receiver opens without subscription? I intend to but the combo MyTV compliant decoder after knowing exactly which channels I will enjoy forever without subscriptions.
hi i am from Ethiopia i need gsky v6 power vu decoder.how to get ?
@worku mohammed: it is very easy to get through me. you will receive it via DHL. please send your request to me via my email address “info @ lemmymorgan.com“
pls how much will gsky v6 cost ,I need it urgently
Pls I’m new to what you are saying since but which decoder can I used to watch ell matches for free
@AAREEWALLY: if you are new, please read this: http://www.lemmymorgan.com/updates-on-available-cheap-satellite-tv-solutions-nov-dec/
Good Day Lemmy, i just buy Gsky V6, it works fine in some powervu programs from different satellites, but 166E 4180 H 30000, scramble ch display in my tv screen.
Has anyone tried recording powervu channels using the GSKY V6? I tried to record the powervu channels using the GSKY V6 but it does not work. It just freezes in blank screen. FTA channels can be recorded fine though.
PLS CAN I KNOW THE PRICE OF THE GSKY V6 & HOW TO GET IT
Good day Lemmy and all in this great forum. Just wanted to confirm if anyone has purchased and used this monster decoder most especially the V6. Let get a live review of its stability and performance. Oga Lemmy said in this article that he is not having a big. Someone should help us here. Thanks and remain bless
LEMMY. HOW CAN ADD IPTV URL TO QSAT 23G? THANKS FOR YOUR REPLY. YOU CAN ASK YOUR CHINESE FRIEND SINCE THE ONE IN THE DECODER IS NO LONGER CONNECTING TO BEINSPOR*
OGA tnk so much 4 dz info. Plz I want 2 knw if dz decoder Gsky decoder can accept biss key. if so i need one. here is my [email protected]
@daniel; gsky can surely accept biss keys
oga lemmymorgan do you have gsky powervu decoder if yes how would I have one from your site thanks auwal sparrow
@auwal sparrow; contact me via email sir.
Lemmy u dont need to answer stupid TT cus he just want to prove dat he no something and is a fake guy can too see him now with is own post he now fumble na fake guy pls when never u see tt messages pls just delete it. in Yoruba. we always say. ( óró rè kò ni èsí) we others will no what you are doing for u and God will continue to bless u in Jesus name.Amen
Oga Lemmy how do u know that dis so call tt is ur fan. I don’t think so.if it is so pls tell him to reserve his sensless comment.
@Lemmy,
Please, are you sure this tipper truck (tt) is a Ghanaian? Bcos Ghanaians are not greedy, selfish and do not lack simple understanding unless you have been adopted into the country preferably from a country where almost everyone is a headsman (those who follow cow in the bush). I want to be professional like you so I rest my breath.
@GIDEON V / R; Do not mind him. I only want to put him in his place. There is no way i can exchange words with him because he is also my fan.
Bros Lemmy pls ignore the troll. let him not stop you from being a blessing to Africa. My new acct I bought is working. U too Much
@Lemmy
please ignore that TT. I feel he may be part of DSTV family, people who derived joy from extorting money from fellow brothers.
Oga mi LM pls what is the biss key to open tv3 on multiltv
@lemmy please Sir ignore dis hippo tt guy bcos we in Ghana n across Africa still need ur services n help badly.We always pray for u, m lemmy.
Thanks Lemmy for your lectures
I succeded to connect my qsat 13g to server but it gives me a message ACTIVE NUMBER EXPIRED OR BOX HAS NOT COUNT
Please what does this means
@dewaz, it simply means what it says sir. Your account has expired
Pls, i just loaded in six months account on my Qsat 23G n it works well wit sim(GPRS network) BT, i’ve been trying to use modem bt it has connect n i’ve been using dat modem b4 my account expired just a month ago. pls, i need ur help. I’ve tried all network bt, still d same.
Mr Morgan, dat’s very thoughtful of u in fact, u’ve just displayed maturity in u. TT shouldn’t b ur problem. Just ignore him.
Hi Lemmy
I have recently upgraded my QSAT 13G,but when I click the red or yellow button from my qsat for activation it tells me IT CAN NOT CONNECT TO SERVER or ACTIVATE FAILED,CHECK YOUR INTERNET CONNECTION OR WIFI CABLE,what is the problem,I am using a 3G modem huawei
@dewaz, please read this: http://www.lemmymorgan.com/a-z-tutorials-on-how-to-connect-your-decoder-dongle-to-internet-solve-internt-connectivity-issues-on-decoders
please any1 in Ghana should help me track this powervu channels 0509113893
Can anyone help me with the frequency of Sprt plus ? I really need it so much.
Pls can someone confirm if Qsat working…mine is saying bad signal.
Hello guys pls leave this guy called tt alone I know him very well we are leaving the same street with him I warn him he should not say stupid thin to
Bros Lemmy is helping those can not avoid dstv.beside is wee smooker if u know this guy u can’t make friend with him. he always smoook wee like Bob marley
tt or what may be your name,you are an ingrate.you better stop you foolish comments or else our causes on u will surely come to passe.U bastard.Don’t pest any of your useless comments here again.
Please Oga Lemmy can you give me the frequency for sport plus(Sprt plus)? mine is not on the decoder.
@David,kindly send me the firmware to ma email add, [email protected]
Thanks and waiting.
Oga lemmy can that AONE decoder firmware that open hd channels and champion tv work with qsat or 4922A decoder. God bless u sir
lewis i have send the update ok
hi lemmy
was verry much happy and giv u thumbs up for the way u reacted to that thing animal called tt.
u are realy a proffesional.
he taught he was doing something to provoke u but u not one bit.
keep up the gud work and just ignore any twerpe like tt.
TT, ur father Nash, in fact u must b a direct descendant of chimpanzee. how could u hv called sm1 who has devoted his precious time to gv us important info an Okro mouth. U r Gbegiri mouth, oloshi, olori buruku, anumofia
David kindly forward the A1 software to me on mail. [email protected]
Baba lemmy, ibaje eniyan lo da ise oluwa du ro . Keep moving forward GOD they your back they shoot your enemy for u no look back no pity them
@tt tilapia titus u are a bad man u see lemmy doing things to make people moving forward u are moving your self backwards u better stop this else u will not end well I pray to GOD to deliver u so go for deliverance
Update ::::
AOne (All-In-One) decoder PowerVu firmware now available. Opens almost all HD Channels on yamal. Including ChampionTv and RedLight.
Check on Google for the firmware.
Upgrade AONE Decoder To Open Champions Tv
This latest software for AONE Decoder open all channels on Yamal 402: 55E.
Transponders
TP: 11.008 V SR: 05.001
TP: 11.008 V SR: 05.000
DOWNLOAD THE SOFTWARE Below
For all that have AONE Decoder you can track with 60 and 90cm dish with signal quality upto 55%.
This software update is for the purpose of Yamal 402: 55E which open all HD Channels after installation, like
Red ligth-tv and MBC2
leave your mail for the update
thanks lemmy look tt dont talk like that ok. there alot of site updating and bringing keys. stv can go to hell. biss keys powervu keys are there to be change ok and if u can not coop. then go buy dstv decode and pay monthly. lemmy go on with the good work and we are always with u
Who is dis TT guy self if ur mama born u wit blood don’t eva look at lemmys website for infor yeye boy na ur father get okro mouth, oga lemmy no mind dis big for nothing person.
gud afternoon oga. with your advice on CANAL+ decoders, i have bought one. i want to do they show LALIGA matches?
I can’t believe this dumb TT guy! so u reli think all these companies (e.g Dstv) rely on posts from blogs to determine if they are being hacked or not???? please grow up! Mr Lemmy, long time.
You really don’t no what is at stake, I can testify to u that , this blog is being monitored 24/7 for info purposes. well, maybe I been too harsh on Lemmy but the fact remain the same , either keys remains secret and shared on demand directly to the needs or encrypt to be approved by moderator before download. This powervu stuffs has been in system for at least a year or more now, I personally used it for 6 months, its true many sites publish this powervu thing but none of them had gone too deep in details as Lemmy deed to the extend of snapping sports 24 pictures and post it on this page . After all , even armed robbers sometimes try to protect themselves.
@tt; Ghanaian are on rampage on lemmy morgan. Well i have very cool ghanian friends who are very respectful, otherwise, I would have jumped into hasty generalization by saying are Ghanaian youths like this?. You claimed you have been ussing it for six months, please let me ask you, when did powervu patch software released for strong decoders? Or on which decoder have you been using it for months. If you are very observant, i only enjoy talking mostly about devices that couldn’t be blocked. I hardly give special support for fta because both fta and any channels opened with any keys, are bound to be blocked or change no matter what. The reasonable fta that we have currently are not meant for poor people because you need a big dish to install them. If you are serious about unblock-able fta, go for the biggest dish possible and track hotbird channels. Iam not always motivated to disclose anything keys until am very certain that it is already a general knowledge in sites like nairaland, 9jatc and facebook pages. am not the most poplar site on net that post about sat. Why are you on my case? Abi em send you to me?
@Lemmy; Never think you know everything about satellite ok, I wonder u are asking me about time strong decoder patch software for powervu was introduce , hahahah, meaning u only know of Gsky and strong 4922A. let me tell you one thing, before the world was created , there was a Man called JESUS CHRIST . Think
@tt The Ghanian, you are simply trolling. You cannot even answer a simply question, You do not even know anything beyong fta, bis keys and powervu that recently enters Africa. What is the business of Jesus with what you are insinuating. Start the research and tell me when the software for powervu was realsed for your own unique decoder and i will put you in your right place with valid facts. I know nothing about satellite but i have people who know more than you can ever imagine. Please if u lack substance do not argue further on this. An as for the powervu issue, i will send you the links of several site which discuss it before i did. Only if you argue objectly. Dstb do not need to visit sites to contact sat providers to block services. They only need to now what is working. Dstv do not need to even see the biss keys since it is very easy to change the keys by service providers. Now listen, do you think dstv has access to qsat hacking tools before they block qsat?. It is easier to block. sports hd 24 is not meant to be used free of charge by unsupported people whether it is leaked or not, it will be blocked during every regular update. LET US TAKE CHAMPION TV AS OUR EXAMPLE. IF THE KEYS GOT LEAKED TODAY, WHETHER PEOPLE HAVE IT OR NOT, THEY WILL UPDATE THEIR KEYS WEEKLY. PLEASE IF YOU ARE FRUSTRATED DO NOT MAKE YOURSELF RIDICULOUS BY ARGUING BLINDLY.
YPU ARE MAKING THREE ERRORS WITH YOUR ACCUSATIONS.
1. That am the only one who dropped the information or that i dropped it first
2. that the keys has been out and available for africa for years(How hard can you lie, powervu has been out for years in asia and latin america where it is officially supported. It only recently got leaked to Africa and first on strong decoders)
3. You also lack understanding by thinking that dst* needs to see a key to report. all they need is general survey. And do you know that installers and dealers also leaks to dstv?.
Why is Irib still working?, why is tv3 still working? Didn’t i talk about them? irib was never blocked, they were driven away from their initial position(arabsat) and they relocated to another position.
@tt, you talk as if you have never benefitted from this site, u know something n u didn’t share it with anybody, you Now have gut to be calling the person WHO have interest of the people at heart an okro mouth.
Infact, you are selfish, greedy and ingrate.
@ MR L M, you are the GOD sent dont rellent in your effort GOD almighty will surelly reward you abundantly [ AMEN ].
Lemmy I know sport channels are working bit I’m talking about the HD channels on Qsat, I have heard that Qsat team are working very hard to bring it back to it viewers to enjoy it again and I just wanted to know whether you have also heard such news?
Good morning sir, i was able to get the nss20e signal yesterday it work for about an hour. last night and then it went off about 8 o’clock, has it been blocked or what sir. help needed.
@saintgr, it has been blocked.
The powervu has just been blocked. What happens to this decoder you are talking about? Will it still open the channels?
@osaze, only the sport channels on nss20e has been blocked. not all powervu
Good day lemmymorgan,is this decoder still opening nss7(20west) other decoders aren’t opening it any longer, that way I can say the box is superb
@oluseyi, this decoder auto calculate and update keys. I do not have a big dish for now, so i cannot determine if it is opening it currently.
hope you are happy now, sports 24 key changed , certain things in satellite must be keep secret . this powervu keys has been around for a very long time until okro mouth Morgan started broadcasting it and spreading like bush fire . For your information , Dstv are using this site as their info point on dongles and other hacking stuffs. no registration , no passwords , any body just google and entered this lemmymorgan site and gets vital info . well , u may offended by this comment but that is the fact. imagine one going in for 3m dish den within a week or two this thing went off.
@tt; you are absolutely ridiculous!! what about other sites? what about Facebook pages where the information was long shared before I posted it.It is so obvious you did not own any big dish because if you own one, you will not depend on one fta channel to meet you sport needs. I reserve all further comments. I can never be offended by your comments because they are 100% false.
like! hello pls i learnt dstv stop collective bouqet 1 account different location pls is der a lecture i could receive to watch premium sports ss3 and ss5 on dstv at lower rate
Great job Mr. Lemmy. Please can we know satellite position and frequencies that are favorable to use with this new receiver.To the best of my knowledge( i stand to be corrected) most of the satellite you gave as an example are mostly not receivable here. I am using 2.4M dish and will like to know satellite in which this seize is okay with.Thanks in anticipation.
@cupid, you can receive all the packages designed for asia from Africa using the biggest dish possible. However, you can receive some channels using between 1.8meter to 3meter dish
which btw Gsky V6 and ancloud p5 offers the best perfoman ce and their current prices
@glenn; they are in opposite sides of the divide.
Hello Bose,i tried the power vu on the intelsat i got known sport channels on that position . all what i got was some Indians channels i used an 1.8 m dish here in jos, the nss12degrees west is it in the same direction with the one on the 60cm dish, i will be delighted if you help me Bose…..
Thanks Mr Lemmy for ur updates on decorders. I’ve interest in v6. what is the price and how long will it take to deliver it.pls inbox me @ [email protected]
please lemmy how about qsat, am in east africa and i cannot recev ss3ni, and max, soo is there any remedy for us
and how about powervu on qsat we need software
Oga Lemmy in have heard that Qsat team are trying very hard to bring back the Sport HD channels back on track and I just wanted to know whether you have heard something about this news?
@Flexis; sports channels have been working always
Oga Lemmy welldone 4 d gud job nd latest information on satellites, I will need dis decorder nd can net c-band dish of 3m above get doze stations too? My email is [email protected]
Gsky sounds like Azsky product .Am i right?
Nice job boss, from ur last review if I understand u well u said a dish nt lesser 2m in northern nigerian and 3m southern naija but today u said 1.8m dish pls can u clarify dat aspect in a lay man language sir, thanks
@zuwe, meaning some people were able to track it using their existing 1.8meter dish based on their location. I gave a general guide to the required dish. But 1.8meter is specific to a particular channel satellite.
@lemmy ….My own problem is the size of the dish I have 1.3 meter dish and I went ask is possible for to get powervu software for strong 4930hd
Hi lemmy may God bless u,pls can we get all this fregueency here in Africa and also I have 2.4 meter dish can I get them all.pls I am in Ghana
nice one n keep it up.
Gud Moni oga lemmy, pls was the cost price for the powervu reciever i need one.
Gudmorn Lemmy, am really happy for dis recent development .Thank alot for the nice job u ve been doing.Just when i was thinking of going for ancloud p5, u ve succeeded in releasing dis decorder with multiple benefits.My questions are :The iptv channels,will they be as stable as the ones on ancloud including the picture quality and sport channels, I did nt see wifi as one of its features, can its iptv work with spectranet network? Should the powervu be blocked in future,can one still use its ccam features to watch sports channels especially epl matches?
@zipele; what you must know is that there no iptv solution that currently beats the perfomance of ancloud. Secondly, this v6 does not come with premium iptv channels but it has a platform where you can input your own iptv url. I already dropped some iptv url so that you can have the idea of what we are talking about. This decoder supports the following internet protocols: wifi via wifi adapter,3g via 3g USB modem, Lan via lan cable and note that if you use 3g mode, it will automatically select the best available connection meaning if you use a 2g sim card inside a 3g modem on v6, the decoder will automatically select the 2g. And always remember that to view any powervu channel on v6, you do not need internet connection. Finally v6 supports cccam but the question if you have a cccam that can open what you want to watch.
We need powervu software for Qsat decoder. Please what is our hope concerning this.
Thanks oga lemmy, i really need this decoder [email protected].
@Lemmy, can anyone get sport channels on this free channels you are talking about.
@Fidel yes. We are already getting sports channels on strong powervu software with keys. Let alone this
nice one sir lemmy i will really love to give it a try……viva FTA we must enjoy our sports via FTA
We appriciate ur effort sir things are getting very intresting for we the low income owners u are doing a very wonderful job sir.however,i would like to ask whether these powerVU can be blocked cos i want to contact u for their price.thanks sir
@joel, yes anything unofficial can be blocked. That’s why you need a provider dedicated to the course. But for now, their is no blocking powervu
well done Oga lemmy.What a very nice decoder.I want 2 know if d iptv inside include beinsport and the data consumption is lesser than other iptv boxes.thank u 4 ur effort.
Am not able to watch the hd channels on Intel Sat 66E because they are scrambled and I don’t know what to do sir
pls what size of dish is required bcos i have 1.8m and is there sport and entartaiment channels there?
Good morning Lemmy. Please can this beast open DSTIEVES? Good review though. Waiting for your reply to take next actions.
but we can use it to watch EPL live matches
@ojiga, yes you can use it to watch live matches
Good morning. Oga i send u a mail and am still awaiting ur response. Thank you and God bless u.