4 Ways to Troubleshoot & fix Smart TV That Always Disconnects When Connected to WiFi

Everyone seems to be able to encounter the failure of smart TV to connect to the internet via wifi.  Today, I will tell you how to deal with or fix smart tv that always disconnects from WiFi issue. The recommendations here would be useful for all smart TVs regardless of the brand.

Four Ways to Troubleshoot and fix Smart TV That Always Disconnects from WiFi

Below are some of the ways or methods by which you can troubleshoot and possibly fix

1. When There is a Problem with the Wireless Router

Most of the time, when you lose wifi connection on your smart tv,  the router is old and the firmware version is too low, which may cause the wireless network to become unstable and often go offline.

You can find the latest firmware of the corresponding model online to complete the firmware upgrade.

Don’t Miss: How to Manually load IPTV .M3U/.M3U8 Playlist Streams on Various Devices Such as; Android, iOS, Smart TV, and others.

2. Hardware Aging Problem With Either of the Devices

The loss of parts caused by long-term use can easily make the TV or box unstable, which increases the possibility of problems.

In this case, you can either replace the worn parts or chips or change your TV or router Altogether.

Especially Relevant: A-Z Tutorial on How To Connect Your Satellite Decoders to the Internet

3. The issue with the Source of Signal Interference

Let’s assume you have a situation whereby the wired broadband connection can be used, but wifi will not work. In this case, observe whether there are signal interference sources besides the router, such as microwave ovens and induction cookers. These devices will affect the signal.

Move the location of the router, preferably in the middle of the house, in a high, open area, without any obstruction, so that the signal is stronger and the divergence is farther.

4. Problem After System Upgrade

After the TV or box is upgraded in the system, there may be some bugs that prevent the device from operating normally.

At this time, you can only perform the downgrade operation, or find the system patch to install, repair the software system-level bug, and resume normal operation. This system can affect either the router of your smart TV. Therefore, you need to troubleshoot the one that is most recently upgraded.