This post was last updated on October 1st, 2020 at 02:16 pm
According to daily work needs, many people will bring multiple mobile phones, even laptops, and tablets when they go out. Sadly, the data charging cables of various interfaces are not compatible with each other. One could argue that there are already a lot of three-in-one charging wires on the market. However, the quality is inferior and only supports 5V output which is just below-par. In order to solve this problem, Baseus two-in-three PD Fast charging cable, a high-quality fully adapted flash series One-for-three fast-charging data cable was launched.
Baseus takes all popular mobile and pc charging such as QC 3.0 charging of Huawei, Samsung, Xiaomi, can fully charge a laptop or a phone with a Type-C interface, Micro USB 2A and it supports Apple iPhone/iPad Lightning cable. All this it does while it allows the device to enjoy a PD fast charging experience of up to 100W.
About PD Flash Charging?
PD (Power Delivery) flash charging enhances power transmission with the connector cable and expands the cable bus during application. This offers a higher voltage and a current transmission power as high as 100W.
In addition, during the process, the direction of power transmission can also be changed. The default for Type-C is 5V/3A. However, since the inception of the PD protocol, this has now been increased to 100W maximum power. The result is faster superior charging.
Baseus Two-in-Three PD Fast Charging Cable Architecture and Design
Baseus Flash series two-to-three fast-charging data cables are clearly distinguished from the inferior products on the market at the first glance.
Firstly, the aluminum alloy wraps the terminal heads and looks very delicate. Between the input and output is the core function module of the wire. The built-in smart fast charging chip controls the power distribution strategy of the output line. Also, the outer skin uses a high-quality nylon braid to enhance the service life.
Baseus Flash Series Two-To-Three Fast-Charging Supported Interfaces
Basically, common fast charging ports on the market include the following
- USB-A ports for Huawei with low-voltage fast charging,
- USB-C ports for PD fast charging,
- Apple Lightning ports for Apple devices,
- MicroUSB ports for older devices.
Baseus Flash series two-to-three fast-charging data cable includes all the above connectors. The input end supports USB-A /USB-C, and the three output lines are USB-C interface, Apple interface, and MicroUSB interface. You can definitely make use of all equipment so you have no worries.
Baseus BPS I Intelligent Fast Charging Technology
At the core technology of the multi-function fast charging cable is the fast charging module in the middle of the cable. This module has a built-in power distribution chip and is equipped with Baseus BPS I intelligent charging technology.
It can set reasonable power distribution according to the connection of the output device. To achieve the purpose of PD fast charging output.
The fast charging function module also has an LED indicator, so you don’t need to guess whether the device is fast charging or not. The indicator lights up in ice blue when it is in regular 5V charging, and it lights up in orange when it is in the fast charging state. This important feature allows users to know the fast charging situation.
The Design of the Output Terminal Heads
The terminal heads of the three output wires are all made of an integral injection molding process, and then set with aluminum alloy fasteners, and the power supported by each wire is silk-screened.
The USB-C terminal has a power transmission performance of up to 100W, the Apple terminal supports up to 20W PD fast charging, and the MicroUSB connector supports up to 18W QC fast charging.
The Durability of Baseus Flash Series Two-to-three fast-charging and Data Cable
In order to ensure durability, Baseus Flash series two-to-three fast-charging data cables are made of nylon fine-knitting technology. After testing, they have passed 3000+ times of tensile, bending, and entanglement testing. There is no need to worry about damage in daily use.
Especially relevant: AirVolt Wireless Charging brings you true Wireless charging technology
Fast Charging Dynamics of Baseus Flash Series Two-to-Three Fast-Charging Cables
The cable has a built-in 5A E-Marker chip, and the USB-C to USB-C mode supports up to 20V5A, which is 100W high-power output and can provide full-speed charging support for notebooks such as MacBook Pro16.
In addition to supporting devices with different interfaces, Baseus Flash series two-to-three fast charging data cables can also extend the single-port output of the charger to one-to-three devices, and charge three devices with different interfaces at the same time without waiting.
Baseus Flash series two-to-three fast-charging data cables support the use of most digital products on the market and support fast-charge output.
In addition, it can also use a pair of multi-function single-port chargers to charge 3 digital products at the same time. Also, Baseus cables support the use of most digital products on the market and support fast-charge output. Baseus Flash series two-to-three fast charging data cables are on the shelves.